Inquiry US
Back To Home
◆ Control Valve ◆ Thermocouple ◆ Bimetal Thermometer ◆ Pressure Gauge ◆ Pressure Transmitter ◆ Actuator ◆ Pressure Controller
Home > Product

WSS-501 Electric-Contact Bimetal Thermometer

Protective tube, section head, locking bolt of

bimetal thermometer are made of 1Cr18Ni9Ti

material. Case uses aluminum; the covered

and the box use double-ring rubber seal ring

thread lock structure. Therefore, the instrument

has good anti-corrosive and water-proof performances.
Radial-type meter is bend tube type. It is small

and beautiful.


WSSX series electric contact bimetal temperature

equip with electric contact device that is Mechanical

electrical contacts. When the temperature of

measured media is changing, thin shaft on the

free terminal and steering linkage will drive pointers

and contact to indicate temperature changing value

on the scale plate. When it is contact or disconnect

with fixed contact, it will drive the relay or contactor

to control temperature or alarm in circuit system


Accuracy grade: 1.5
Error deviation limit: basic error*1.5
Contact rated power:10VA
the maximum working voltage of Contact:~380V or 220V
the maximum working current of contact:1A

 


 
W
Temperature Instrumentation
S
Metal Expansive type
S
Bimetal
X with electric contact
Nominal Diameter of Scale plate
3)ø60
4)ø100
5)ø150
structure
0)Angle type (axial type)
1)Straight type (Radial type) 
8)Universal Type
5)Hot nested-angle type
6)Hot nested-straight type
7)Hot nested-Universal Type
Installation
1)Movable external thread connector
2)Movable inner thread connector
3)Movable flange
PRIVACY POLICY |SITE MAP Copyright © 2011 Valve. All rights reserved. Su ICP 2002348