Overview
1151 type transmitter has many kinds of models which can measure
micro-differential pressure to large differential pressure, low pressure
to high pressure, level, vacuum and gravity. If it is matches with
throttling device, it can measure flow without prescription devices.
Flange level transmitter includes flat flange and insert flange. The
installation includes 3＃ and 4＃、150＃（working pressure is
1.89Mpa）and 300＃（working pressure is 4.95Mpa）. In addition
to 316 stainless steel-wetted materials, there is Hastelloy, Mongolia
Nile and tantalum which can be used in corrosive media.
1151 type transmitter is compact with explosion-proof and all-weather structure.
The installation and operation are simple. Terminals and amplification circuit can
be placed in the upper chamber in the closed electrical and separated from each other. Therefore, when it is field wiring, the amp was still working under the closed state. Amplification circuit has reverse polarity protection to prevent damaging to the transmitter.
|
1151DR |
Micro Differential Pressure transmitter | ||||||
|
|
code |
range | |||||
|
2 |
0-0.2 to 0－1.49kPa | ||||||
|
|
code |
output | |||||
|
F |
4～20mA DC | ||||||
|
|
code |
Pressure volume chamber; plug; isolation diaphragm | |||||
|
22 |
316SST |
316SST |
316SST | ||||
|
|
|
code |
0～100% linear scale indicator 0～10squre root scale indicator Bend bracket pipe installed（ø51 mm tube） Bend rack rube plate installed Flat rack tube installed（ø51 mm tube） | ||||
|
M1 M2 B1 B2 B3 | |||||||
|
1151DR |
2 |
F |
22 |
S |
M1B3 |
Complete model of transmitter | |
Note: for special requirements, like explosion-proof, please note when order.