My status
Manufacturer
Product search
May  15 , 2024  Wednesday
Home> level meter >> magnetic plate level transmitter >> UHZ-517C23Magnetic Turning Column health standard level gauge
  • Introduction
  • Specifications
UHZ-517C23 Health column level gauge magnetic translation, in strict compliance with FDA standards and meet the GMP (World Health Organization Good Manufacturing Practices requirements, because the product is simple, reliable, all orifices have adopted ISO standard health clover fast loading clamp installation, make disassembly easy to clean, level gauge inside and outside wall surface using electrolytic polishing treatment, no dead corner, easy to clean, sterile, meet the GMP requirements.
Inside the liquid medium for dissolving the level, community level measurement. In addition to on-site instruction can also be equipped with Remote transmitter, alarm (control switch), detection range. Instructions novel, intuitive reading, eye-catching, observing the direction indicator to change the angle according to user needs. Measurement range, from tank height restrictions, indicating complete separation of institutions and the measured medium, thus sealing, high reliability and safe. Simple structure, easy installation, low maintenance costs.

Range: 150 ~ 8000mm, 8000mm on the center or far from over conditions do not allow input level meter can be used over the length of sub-manufacturing.
Working Pressure: 2.5MPa
Operating temperature: -0 ~ 150

Accuracy: ± 10mm
Medium density: 0.9 ~ 1.2g/cm3
Medium density difference: ≥ 150kg/m3 (measuring medium-bit)
Environmental vibration: ≤ 0.5mm amplitude frequency ≤ 25Hz
Follow the speed: ≤ 0.08m / s
Medium viscosity: ≤ 0.4Pa.s, the viscosity of the medium or low to measure temperature and crystallization media, optional heating Jacketed Liquid Level
Process connection: bypass side installation quick clamp and welding ends: DN25
Bypass pipe at the top: quick clamp and welding plug, can install self-cleaning connector
Bypass pipe at the bottom: quick clamp and quick 90 ° elbow
Material: bypass tube: 1Cr18Ni9Ti 304 316L
Float: Titanium
,