XJP-42B s a panel-mount four-digit display of guns. A single chip microcomputer, small size, light weight, shape a clear, easy to install. Input signal using optical coupling, there is a better anti-interference. When using LJ or 3SG series proximity switch for speed sensor only requires the measured shaft with a metal protrusion can be non-contact speed measurement. With factory SZHG-01 Hall-effect speed sensors for contact speed measurement. Another feature is the instrument the number of guns in general were not quite ± 1 digit of the additional measurement error, it is suitable to measure low-speed situations. XJP-42A is a general purpose gun, measurement unit is r / min. XJP-42B is a special gun, compared with XJP-42A multi-step T = k / n op, k made by the user, measurement unit is the min / r. The instrument used for low-speed measurement, the sensor cable lengths up to 50m. Continuous use, suitable for industrial on-site power equipment measuring the speed
Measuring range: 10 ~ 9999r/min
Input signal requirements: "0" <1V "1"> 5V and a 4mA load capacity
Sampling time: 1s ≤ T ≤ 1s plus a measured cycle
Accuracy: 0.02%
Sampling method: automatic continuous
Working conditions: ambient temperature of 5 ~ 40 ℃
≤ 85% relative humidity, non-corrosive explosive gas
Power supply: AC 220V 50 Hz
Dimensions: 75 × 140 × 172 (mm) high × width × depth
Hole Size: 132 × 67 mm
Weight: 1.2 kg
,
