XJP-4896A is a tray-loading 5 LED wire-speed length measuring instruments, wire-speed display units to m / min, displayed to two decimal three integers, instrument actually measured speed, and then multiplied by πD into line speed, length of display units to meters and displayed as a decimal 4-bit integers, two parameters combined with a monitor, through the key choices, reset display first wire-speed. Instrument parameters can be set for the sensor pulses per revolution, and reliable wheel diameter D P
Key performance indicators Power: 220VVAC 50HZ ~ 60HZ, 5VA
Accuracy: 0.1
Sampling period: 1 sec
Frequency measurement range: 0.11HZ ~ 1500HZ
The sensor requirements: the final stage for the NPN
Output, 12VDC
Power supply, load capacity of the switch type sensor 1.2KΩ
Use environment: Temperature -10 ℃ ~ 55 ℃, relative humidity ≤ 85, no occasion of explosive gas.
Layman Size: 48MM High wide × 100MM × 96MM deep hole
Size: 45MM × 92MM width
, ,
