My status
Manufacturer
Product search
November  26 , 2024  Tuesday
Home> level meter >> other >> CYC900Tuning Fork Level / Level Switches
  • Product number:MC-000448006501
  • Product name:Tuning Fork Level / Level Switches
  • Product Type:CYC900
  • Product nameplate:SAIC
  • Project Category:level meter >> other >>
  • Manufacturer:Shanghai Automation Instrumentation Co., Ltd.
  • Sales unit: Shanghai Automation Instrumentation Marketing Center
  • Information download:Click to enter the download page  
  • Introduction
  • Specifications
CYC900 Tuning Fork Level Switch Series is a new Level switches. Produced by the vibration of tuning fork crystal excitation, when the tuning fork is submerged when the vibration frequency of material changes, the frequency detected by the electronic circuit and a switch output volume.
Tuning Fork Level Switch is also known as "electric float," The use of float level switch, and because the structure of agitation, bubble, vibration and other causes can not use the float level switch can be used the occasion "tuning fork Level Switch." As the tuning fork Level Switch no moving parts, there is no need to maintain and adjust float level switch is the upgrading products.
Adaptable: the different parameters measured liquid density no impact on the measurement. Scaling, agitation, turbulence, bubbles, vibration, medium viscosity, high pressure and harsh conditions have no effect on the test.
No adjustment: As the tuning fork detection limit switch from the measured electrical parameters and density of medium impact, so no matter what kind of liquid do not require on-site measurement calibration.
From maintenance: As the process of tuning fork detection limit switch by the electronic circuit to complete, no moving parts, it will be put to use once installed requires no maintenance.
Power: 24VDC (standard)
      220VAC (optional)
Output: SPDT Relay (SPDT)
Output capacity: 220VAC 5A; 24VDC 3A
Ambient temperature: -20 ~ 70
Fork Body Material: 316 stainless steel
Response time: <0.5S
Delay time: 1 ~ 50S (optional)
High and low alarm: the scene can be set for the HLFS (high alarm mode) or LLFS (Low Alarm)
Process connection: 1 "NPT thread installation (standard, optional BSPT); flange installed (optional)