- Home
- |
- About us
- |
- Certificate
- |
- Products
- |
- Performance
- |
- Member
- |
- News
- |
- Technical Support
- |
- Contact us
Technology parameters of CH actuator |
Parameters of valve body | |||
Power supply |
AC200/220V,50/60Hz |
Nominal diameter |
DN10~300mm | |
Output torque |
50N·M~2000N·M |
Nominal pressure |
PN1.6 2.5 4.0 6.4 31.5MPa(special order) | |
Action range |
0~90° 0~360° |
Leakage |
Soft sealing: no leakage |
Hard sealing :≤10-5 of rated flow |
Action time |
15s/30s/60s |
Actuator |
Equipped with PSQ、HQ、UNIC、361RS electronic electric actuator | |
Protection device |
Overheat protection |
Flow characteristics |
Quick open | |
Environment temperature |
-30°~60° |
Adjustable range |
DN10-80 |
DN100-300 |
250:1 |
350:1 | |||
Manual operation |
With handle operation |
Basic error |
±1% | |
Limit |
Electrical 、mechanical limit |
Dead band |
≤1% | |
Protection |
Quite to IP-65 |
Hysteresis |
≤1% | |
Position measuring |
Can install switch or potentiometer |
Suitable temperature |
Sealing surface | |
Drive motor |
8W/E |
PTFE≤150℃ RTFE≤180℃ PPL≤300℃ hard sealing≤450℃ | ||
Incoming interface |
PE1/2〞Incoming Line Lock |